Dr Jackson Kung'u- Mold Specialist

Helping People Resolve Mold Problems

Contact Us

Dr. Jackson Kung’u (PhD)- Mold Specialist.
Phone: 905-290-9101
Mobile: 437-556-0254

Home | Fungi

Fungi

Health Effects of Mold

All molds are potentially a health hazard. While majority of common molds are not a concern to individuals who are healthy, the health effects of most of the indoor molds are not known. Some symptoms associated with mold exposure are also highly controversial. Health effects of mold include:

1. infection;

2. allergic reactions (i.e., allergy);

3. mycotoxin poisoning.

 Infection

Infection of healthy individuals by indoor molds is very rare. Occasionally, however, immunocompromised individuals may be infected by some opportunistic pathogens such as species of Aspergillus, Penicillium and Fusarium.

Allergic Reaction

It’s estimated that about 20% of the human population is allergic to normal spore concentrations. The rest 80% would require exposure to higher spore concentrations. Health effects of mold partly depends on the amount of mold an individual is exposed to. However, with the large number of mold species and strains growing in buildings and the large inter-individual variability in human response to mold exposure it’s hard to define what is “normal” or “high” mold spore concentration.

Mycotoxins

Apart from infections the most well known health effects of mold is mycotoxin poisoning. Some common molds such as Aspergillus flavus, Stachybotrys chartarum, Fusarium, Alternaria, Paecilomyces, Rhizopus, Trichoderma, and Trichothecium produce substances (mycotoxins) that are toxic to humans, animals or other microorganisms. A number of mycotoxins are not only toxic but are also highly potent carcinogens. Spores of toxin producing molds contain mycotoxins. Majority of mycotoxins are not volatile and therefore mycotoxin exposure is likely to occur through inhalation of spores and dust. Evidence that inhaled mycotoxins affects human health is circumstantial.

Minimizing Exposure To Mold

The best way to deal with the health effects of mold is to minimize exposure to mold. Exposure to mold can be minimized by improving the indoor air quality. Here are some steps one can take:

  • Controlling humidity and letting more air into the house by ensuring sufficient ventilation. This prevents moisture from building up on walls and windows. If there is excessive humidity, mechanical ventilation such as a fan may be needed to get rid of it.
  • Measuring humidity by using a hygrometer to see if a de-humidifier is needed. The relative humidity should be kept below 50% in summer and 30% in winter.
  • Repairing leaky roofs, walls, and basements.
  • Cleaning moldy surfaces with a detergent.
  • Keeping the house clean and dust-free.
  • Regularly cleaning and disinfect humidifiers, de-humidifiers, and air conditioners.

If you have a question regarding health effects of mold, contact us at 905-290-9101.

Mold In Bathrooms

Growth of mold in bathrooms is very common if there is no proper ventilation. Mold in bathrooms could be due to poor ventilation and high humidity in the bathroom.  The mold could be found growing on the walls and also the bathroom ceiling. Severe growth of  mold in bathrooms can also occur in drains which emit odors. Drains are a hot spot for fungal growth in bathrooms. The extent of fungal contamination in bathrooms is dependent on the amount of moisture present.

Predominant types of mold in bathrooms include Acremonium sp., Cladosporium sp., Cladophialophora sp., Fusarium sp., Phoma sp., Exophiala sp.,  Scolecobasidium sp., and Aureobasidium sp. With leaking pipes or prolonged excessive moisture other indicators of moisture damage such as Stachybotrys sp and Chaetomium can be found growing behind the baseboard.

How to control growth of mold in bathrooms

To control growth of mold in bathrooms, humidity has to be reduced. The CMHC recommends the following:

  • Check the bathroom fan to make sure it exhausts to the outside.
  • Turn the bathroom fan on when you shower. Keep it running for a few minutes after you finish your shower.
  • Take short showers.
  • Keep surfaces that get wet, such as the walls around the bathtub and shower, clean and dry.
  • If there is a carpet in your bathroom, remove it.
  • Check for water leaks.
  • Keep drains in good shape by removing debris from them.

Mold Spores: what are mold spores?

Several molds that grow both indoors and outdoors, produce spores. Mold spores have been likened to the seeds of a dandelion, but they are microscopic in size. Because of their size, mold spores cannot be seen with the human eye save with the aid of a microscope. Mold spores occur in various colors and shapes, such as round, spheroid, banana-shaped or tadpole-shaped. They can occur in enormous quantities depending on the type of mold producing them, and at all times of the year where the environmental conditions allow.

Mold spores are well known for their ability to cause sensitization and allergic responses.  Exposure to airborne mold remains the biggest concern when looking at molds and their affects on human health.  Mold spores and other fungal structures (e.g. hyphae) contain allergens. These allergens cause mold allergy to sensitive individuals and may also exacerbate asthma. Whether or not the spores are alive, the allergens in and on them may remain allergenic for years.

There is no definite seasonal pattern to mold spores in indoor indoor environments. Growth of mold indoors is determined by the presence/absence of moisture. However outdoor molds are seasonal, first appearing in early spring and thriving throughout summer until fall. Outdoor spore concentration also influences indoor spore concentration as outdoor spores generally infiltrates indoors.

Mold spores are much smaller than pollen grains and easily bypass the normal filtering function of the nose. Inhalation of mold spores into the lung is a common cause of asthma attacks in people who are allergic to molds.

 

Sources of mold spores

Mold spores come from soil and decaying vegetation, and are everywhere in nature. In houses with evaporative cooling and old carpets, mold can be a problem.  Growth of mold in houses increases after a plumbing, roof leak or chronic condensation. Many types of molds are found in soil and house dust.

Molds In Basement

Both finished and unfinished basements tend to be damp and hence prone to mold growth. Molds in basement are predominantly influenced by chronic moisture problems, such as window well leakage. Whether a basement is occupied or not, growth of molds in basement is a health hazard since the spores tend to move upwards to the living spaces. It has been established that basements could be the predominant sources for mold spores in both summer and winter. When people who are susceptible to mold inhale the airborne spores they react to the proteins in the wall of the spores.

How do you know you have molds in basement?

You know you have molds in basement when you smell the “musty” odor or see small black, bluish or white spots along the basement walls. The mold spots may be fuzzy or look raised. Mold growth will occur on any organic or porous materials including paint, cardboard, newspapers, wood, textiles, and carpet that are exposed to moisture. You may also find molds in basement growing on dirt or dust trapped on fiberglass insulation. Mold growth may also be visible on wooden studs and rafters.

How to control molds in basement

Elimination of moisture is the most effective method of mold growth control. To eliminate moisture problems in the basement may involve foundation damp-proofing, fixing grading problems, providing adequate on-lot drainage systems, and sealing areas of moisture ingress. Also remove excessive internal moisture sources in the basement (humidifiers, cooking) and ventilate other sources (clothes dryer, bathroom). If condensation in the summer is the problem, it’s recommended that you do not ventilate the basement directly with warm, humid air. Ventilation through an air conditioning system or with a desiccant-type heat exchanger is recommended.

If you have molds in basement call 905-290-9101. We may be able to help you or direct you to people who could help you.

How To Get Rid Of Mold Growth

Many people and even institutions would be happy if they could find a way of getting rid of mold. Unfortunately it’s almost impossible to get rid of mold completely. However, if we understand the conditions that support mold growth, we could then try to manipulate those conditions so as to control mold growth. Mold growth has the following requirements:

1. Presence of spores or mold fragments that are capable germinating (viable) and developing into new mold growth.

2. Moisture. Like any other living organism mold requires water for growth.

3. Nutrients. Nutrients are readily available as some components of building materials are made of easily degradable organic materials. Nutrient are also available in dust.

4. Suitable temperature. For most indoor molds the optimal temperature for growth is between 20 and 25 oC.

The last two mold growth requirements would be difficult to manipulate. As mentioned above some materials in buildings are readily degradable by microorganisms. As for the temperature, mold can grow at a wide range of temperature and it’s optimal temperature is similar to that required in buildings for human comfort.

To control mold growth, therefore, we need to try and reduce or eliminate spores/mold fragments and water in our buildings. We could reduce the amount of spores and/or mold fragments settled on interior surfaces in buildings by HEPA vaccum cleaning all surfaces that are prone to dust on a regular basis.

To be able to control moisture, we need to understand the sources and also the mechanisms by which moisture moves through the building. The primary sources of moisture in buildings include:

1 . Liquid water, from precipitation (rain and melting snow) or plumbing leaks;

2. Water vapor (condensation), from the exterior and from activities and processes within the building;

3. Liquid and vapor from the soil adjoining the building;

4. Moisture built-in with materials of construction or brought in with goods and people

 Controlling moisture in the building may require the help of a professional who understands the processes by which moisture moves in and through the building. To completely get rid of mold growth in a building is difficult.