Dr Jackson Kung'u- Mold Specialist

Helping People Resolve Mold Problems

Contact Us

Dr. Jackson Kung’u (PhD)- Mold Specialist.
Phone: 905-290-9101
Mobile: 437-556-0254

Home | Mold Testing

Mold Testing

Basement mold

Question: I suspect we have basement mold. We moved in to our townhouse almost a year ago. In the past several months I have noticed that my daughter’s allergies are acting up a lot more, especially when we are in the basement. I too have been experiencing a lot of congestion and sneezing etc. when in the basement. I can smell a musty smell (nobody else can, but I can) and I cannot locate it. I can’t see mold, I’ve torn apart the house. My only guess is it’s in the carpets or walls. I notice you have a mold test kit to measure mold in the air. How accurate is it at picking up positive results i.e. does there have to be a lot of mold to pick up a positive (as I am the only one who can smell this musty smell so it would have to be a very sensitive test). Do you know of any professional companies that can come in and determine if we have basement mold?

Thank you!

Answer: Thank you for your question regarding basement mold. Our mold test kit is basically a DIY kit using the same air sampling equipment that a professional would use. However, the kit is not intended to replace the services of a professional. By a professional we mean someone qualified who will not just come and take air samples (which anyone can take) but will also troubleshoot the problem and offer solutions even if air samples are negative. By “negative” we mean having very low fungal counts since very rarely would there be no spores in the air at all. Basement mold is very common due the dampness found in most basements.

The equipment samples for airborne spores (and other particulates) and not for Microbial Volatile Organic Compounds (MVOCs). These are volatile chemicals produced by the metabolism of fungi and bacteria and are responsible for the musty smell. As for the accuracy of the equipment, there are a number of factors that can influence the results. For example:

  1. The type of mold present: some molds produce spores either enclosed in fruiting structures or in “wet” form which means these kinds of spores do not readily become airborne until disturbed during renovation or when they completely dry out. If these are the dominant types of molds present in your house the air samples could be negative.
  2. The time of sampling: the concentration of airborne spores at time of sampling could be low and hence the results could be misleading.

Basement mold can be controlled by reducing humidity in the basement. You can find professional companies listed on the following web pages http://www.moldbacteriaconsulting.com/business-directory/ and also http://www.moldbacteria.com/servicelist/index.html. You can also give us a call at 905-290-9101 for more information.

Spore Trapping And Counting

Spore trapping and counting is extensively used in crop protection to:

  • determine the concentration of pathogenic spores carried by wind
  • forecast a disease outbreak
  • get facts about periodicity of spore showers on crops as one of several infection requirements
  • determine correct timing of protectant sprays and other control measures. 

Spore trapping and counting also provide useful information about airborne spores that cause respiratory allergies such as rhinitis, asthma, and farmers’ lung disease. In building environments, spore counting and trapping can be used for detecting dry rot or other hidden mould. Although there are no acceptable levels of airborne fungal concentration in indoor environment, spore trapping and counting can also help in determining if occupants were potentially exposed to high levels of allergenic fungal spores.

Testing Carpets For Mold

Carpets are reservoirs of health hazard particulates including mold spores, dust mites, and animal hair. These particulates are allergenic to some people when inhaled. Mold spores are very tiny and easily become airborne when the carpet is disturbed as people walk in the house or when the carpet is being cleaned.

Cleaning the carpet with a good vacuum cleaner on regular basis significantly reduces the number of settled mold spores and other particulates. In fact there is no need to test carpets for mold if they are well maintained.

Carpets can be tested for:

  • Settled mold spores
  • Mold growth.

To test a carpet for settled spores a dust sample is required. Dust can be collected from an area of 1 square meter. It’s important to ensure that enough dust is collected to enable the laboratory perform both culture analysis and direct microscopic examination of the dust.  

When is it necessary to test a carpet for mold growth? You can test a carpet for mold growth following water damage if the carpet was not completely dried within 48 hours. This test may involve cutting a piece of carpet from the affected area and sending it to the laboratory for testing.

How To Test For Mold

Mold testing has 2 components:

  • Assessment of the extent of mold growth in the building
  • Laboratory testing of the samples collected during the building assessment

Assessment of the extent of mold growth

This component of mold testing is very important because the results of this assessment are used to determine the level of remediation required. Mold assessment in a building should be performed by a qualified professional.

Laboratory Testing Of Samples

Laboratory testing of samples for mold is necessary especially in situations where mold is suspected to be the cause of illness to the building occupants. The samples tested for mold include the following:

  • Bulk and Surface Samples: These include samples such as pieces of carpet, carpet dust, drywall, wallpaper, swabs, tape lift samples or any other material suspected of mold contamination.
  • Air Samples. Air samples may be collected on culture media or on inert non-culture media depending on the objectives of the mold investigation.