• Skip to primary navigation
  • Skip to main content
  • Skip to primary sidebar
  • Skip to footer
  • My account
  • Checkout
  • Cart
  • Courses
  • Consulting Sessions

Dr Jackson Kung'u- Mold Specialist

Helping People Resolve Mold Problems

Contact Us

Dr. Jackson Kung’u (PhD)- Mold Specialist.
Phone: 905-290-9101

  • Home
  • About Me
  • Courses
  • Consulting Sessions
Home | Indoor Air Quality | Air Sampling | Indoor Air Quality – Testing For Mold

Indoor Air Quality – Testing For Mold

The health effects of poor indoor air quality are dependent upon several factors including the type of contaminant, concentration, duration of exposure, and individual susceptibility. Indoor air quality can be compromised by a number of contaminants including mold.

Assessing the status of Indoor Air Quality

The status of indoor air quality is assessed by measuring the levels of contaminants indoors. These Contaminants include:
1. Biological contaminants such as mold, bacteria, viruses, etc.
2. Chemical contaminants such as formaldehyde.

This article is focusing on mold as an indoor air contaminant. Contamination of air by mold spores can easily be determined by air testing.

Testing Air for Mold

There are two methods commonly used to test air for mold. These are:
1. Viable or culturing air testing

2. Non-viable or total spore count air testing.

Assessing the Status of Indoor Air Quality by Viable Air Testing.

For viable air testing, air sampling can be conducted in two ways. The first method uses settle plates. This technique involves opening agar plates inside the area being tested and leaving them open for half an hour or more. Airborne mold spores and hyphal fragments settle by gravity onto the agar plates. Any viable spores or hyphal fragments would then grow into visible colonies that can be counted and identified. A high colony count is an indication of poor indoor air quality. This method is cheap since all it requires is agar plates. However, it’s not an efficient way of testing for mold spores in the air. The second method uses an air sampling pump. In this case, air is impacted onto the agar plates by a pump. This method is more efficient since it doesn’t depend on free-falling of spores into the agar. Viable testing for mold has a big disadvantage in that it only detects viable spores/hyphal fragments yet even dead spores are a health hazard.

Assessing the status of Indoor Air Quality by Non-viable Air Testing.

Non-viable air testing samples are collected by impacting air on an inert surface coated with an adhesive. Most of the spores and other particulate in air get stuck on the adhesive surface. The samples are then tested by direct microscopy. The spores and/or other particulates are enumerated and identified. The results are reported as spores per cubic meter of air. This method of sampling requires an air sampling pump such as BioPump and air sampling cassettes such as Air-O-Cell or allergencos. The major advantage of this method is that both viable and non-viable airborne spores and other particulates are enumerated thus giving us a better idea of the status of the indoor air quality.

Filed Under: Air Sampling, Indoor Air Quality, Mold Testing Tagged With: air sampling, health effects, indoor air quality, mold exposure, mold testing, mould testing, testing for mold

About the Author

Dr. Jackson Kung'u works for MBL, a laboratory that specializes in identification and enumeration of mold and bacteria commonly detected in air, fluids and bulk samples collected from homes, schools, offices, hospitals, industrial, agricultural, and other work environments. Jackson also provides a unique Mold Training Course on How to Recognize Indoor Mold, Develop Effective Sampling Strategies, Interpret Laboratory Results and how to Control Mold Growth.

sidebar

Blog Sidebar

Is Mold Making You Sick?

Is mold in your house making you sick?

Is mold in your house making you sick? This kind of a question would arise if someone suffers from persistent symptoms such as sneezing, runny noses, red eyes and skin rashes that seem to lessen or disappear when the person is not at home. The situation maybe complicated by the fact that only one member[Read More]

Footer

Important Links

  1. Refund Policy.
  2. Privacy Policy.
  3. Terms & Conditions.
  4. Frequently Asked Questions.

Online Courses at Glance

  1. Fungal Spore Identification Course.
  2. Mold Inspection, Identification and Control.
  3. How To Interpret Mold Test Results.
  4. How To Take Mold Samples.
  5. Mold Inspection Business Course.
  6. Online Legionella Training Course.

Testing Services and Products

  1. Cannabis Testing
  2. Mold Testing
  3. Bacteria Testing
  4. Legionella Testing
  5. Sampling Supplies

Our Location

Mold & Bacteria Consulting Laboratories
1020 Brevik Pl., Unit 1A
Mississauga, Ontario, L4W 4N7
905-290-9101